Fire Door Replacements

Fire doors are designed to protect people, escape routes and property by slowing the spread of fire and smoke. However, they can only perform effectively if they are correctly specified, installed and maintained. When a fire door is damaged, non-compliant or no longer suitable for the building, replacement may be the safest and most practical option.

At AFP Wales, we provide professional fire door replacement services for commercial buildings, housing associations, residential blocks, hotels, healthcare premises, education sites, retail environments, industrial buildings and multi-site property portfolios.

Based in South Wales, we support clients across Cardiff, Pontypridd, Newport and the wider Wales region. Through the wider LS Fire Group, we can also provide replacement fire doors and installation support across the UK.

Whether you need to replace a single failed door or manage a wider programme of fire doors replacement across multiple sites, AFP Wales provides clear advice, compliant products and professional installation.

Our professional replacement services

A fire door is more than a door leaf. It is a complete fire-resisting assembly made up of the door, frame, seals, hinges, closer, glazing where required, hardware and signage. If one element is damaged, unsuitable or incorrectly fitted, the performance of the entire door set can be compromised.

In some cases, minor defects can be repaired through fire door maintenance or remedial work. In others, full fire door replacement is required to restore compliance and ensure the door will perform as intended during a fire.

AFP Wales supplies and installs compliant replacement fire doors for a wide range of commercial and residential environments. Our team can assess your existing doors, recommend the correct replacement specification, and complete the installation with minimal disruption to building users.

When does a fire door need replacing?

Not every fire door fault requires full replacement. However, replacement is often the correct route when the door is too damaged, unsuitable or non-compliant to repair safely.

A replacement fire door may be required where there is:

Significant damage to the door leaf
A damaged or distorted frame
Excessive gaps around the door
A failed or missing self-closing device
Non-compliant glazing or hardware
Missing certification or unclear fire rating
Repeated inspection failures
Unauthorised alterations that affect performance
Damage caused by impact, misuse or long-term wear

A fire door may also need replacing after a fire door survey or inspection identifies defects that cannot be corrected through standard repair work. In these situations, replacing the full door assembly helps restore performance and provides a clearer compliance position.

Replacement fire doors we supply and install

FD30 and FD60 replacement fire doors

FD30 fire doors are designed to provide 30 minutes of fire resistance, while FD60 fire doors provide 60 minutes. The correct rating will depend on the fire risk assessment and the role of the door within the building.

FD30 doors are commonly used in internal corridors, office areas and many residential settings, while FD60 doors are often specified for higher-risk areas, plant rooms, service areas and locations where extended protection is required.

When replacing a fire door, it is essential that the rating of the new door matches the building’s fire strategy and compliance requirements.

Glazed replacement fire doors

Glazed fire doors can provide visibility and light while still supporting compartmentation, provided they are correctly specified as part of a certified fire door system.

AFP Wales can supply and install glazed replacement fire doors using appropriate fire-rated glazing, compatible frames, seals and hardware. These are often used in offices, education buildings, healthcare settings and communal areas where visibility is important.

Flat entrance fire door replacement

Flat entrance doors play a vital role in multi-occupied residential buildings. They help contain fire within individual dwellings and prevent smoke or flames from spreading into communal corridors and escape routes.

AFP Wales can support landlords, housing associations and managing agents with flat entrance fire door replacement where existing doors are damaged, non-compliant or no longer suitable.

Fire exit door replacement

Fire exit doors are essential for safe evacuation and secure external escape routes. Where a fire exit door is damaged, difficult to open, poorly aligned or no longer secure, replacement may be required to maintain safe egress from the building.

AFP Wales can advise on suitable replacement options for commercial fire exit doors, ensuring they support the building’s escape strategy while meeting operational and security needs.

Our fire door replacement process

Survey and specification

We begin by reviewing the existing fire door, its location, condition and role within the building’s fire strategy. This includes checking the door leaf, frame, seals, hardware, gaps, closing action and any available certification or rating information.

From this, we identify the correct replacement specification based on fire resistance rating, usage, risk level and compliance requirements.

Supply of compliant replacement fire doors

AFP Wales supplies fire doors as part of the replacement service, helping ensure all components are compatible and appropriate for the intended location.

This may include the door leaf, frame, intumescent and smoke seals, hinges, self-closing devices, fire-rated glazing where required, signage and other essential hardware.

Professional fire door installation

Once the correct door has been specified, our engineers complete the installation carefully and professionally. Correct fitting is essential because even a certified door can fail if it is installed with excessive gaps, unsuitable hardware or poor alignment.

We work efficiently to minimise disruption, particularly in occupied commercial premises, residential buildings and high-traffic environments.

Handover, documentation and maintenance advice

After installation, we provide the relevant handover information and documentation to support your compliance records. We can also advise on future inspection and maintenance requirements to help keep the replacement fire door compliant over time.

Because fire doors are used daily, ongoing checks remain essential after replacement. AFP Wales can support this through fire door inspection, maintenance and repair services.

Why choose AFP Wales for fire door replacement?

There are many providers offering fire doors replacement, but duty holders need confidence that replacement doors are correctly specified, professionally installed and supported by clear compliance records. AFP Wales provides:

Professional fire door replacement for commercial and residential buildings
Supply and installation of FD30 and FD60 fire doors
Glazed fire door and flat entrance door replacement
Fire exit door replacement support
IFC Certification where applicable across our fire door services
Clear recommendations following surveys or failed inspections
Minimal disruption during installation
Local expertise across Wales
UK-wide support through the LS Fire Group
Ongoing inspection, repair and maintenance support

Book a fire door replacement survey with AFP Wales

If your fire doors are damaged, non-compliant or have failed inspection, AFP Wales can help you determine whether repair or replacement is the right route.

From single fire door replacement projects to wider fire door replacement services across multi-site estates, we provide professional advice, compliant products and expert installation across Wales and the wider UK.

Contact AFP Wales today to arrange a fire door replacement survey or discuss your requirements with our team.

Fire safety is a responsibility that never rests and we’re here to implement complete fire protection for your business. Get in touch with our industry-leading experts to learn how we prevent fire, protect lives, and ensure compliance for you.

01443 843 927

[email protected]

Fire Door Replacement FAQs

How much does fire door replacement cost?: The cost of fire door replacement depends on several factors, including the type of door required, the fire resistance rating, the condition of the existing frame, whether glazing is needed, and the level of hardware required. A single internal FD30 replacement door will usually differ in cost from a glazed FD60 door, a flat entrance door or a commercial fire exit door. Site access, installation complexity and whether multiple doors are being replaced can also affect the final price. AFP Wales can assess your building and provide a clear quotation based on the correct replacement specification.
When is fire door replacement needed instead of repair?: Fire door replacement is usually needed when the door is too damaged or non-compliant to be restored through standard repair work. For example, replacement may be required if the door leaf is badly damaged, the frame is distorted, certification is missing, gaps are excessive, or previous alterations have affected the door’s fire performance. Minor issues such as worn seals, faulty closers or damaged hinges may be repairable, but where the integrity of the door assembly is compromised, replacement is often the safest and most compliant option.
Can you replace fire exit doors as well as internal fire doors?: Yes. AFP Wales can support with fire exit door replacement as well as internal fire door replacement. Fire exit doors play an important role in safe evacuation and external escape routes, particularly in commercial and public buildings. If a fire exit door is damaged, difficult to open, poorly aligned, insecure or no longer suitable for the escape strategy, replacement may be required. The correct replacement should support safe egress while also meeting security and operational requirements.
Do replacement fire doors need to be certified?: Replacement fire doors should be suitable for their intended location and supported by appropriate certification or evidence of fire performance. The door leaf, frame, seals, hinges, closer, glazing and hardware must all be compatible so the door can perform as a complete system. Using certified components and competent installers helps ensure the replacement door meets the required fire resistance rating and supports fire door compliance.
Can fire doors be replaced in occupied buildings?: Fire door replacement can usually be carried out in occupied buildings with careful planning. AFP Wales works to minimise disruption by coordinating access, managing work areas safely and planning installation around the needs of building users. This is particularly important in commercial premises, residential blocks, healthcare settings, education buildings and other environments where people may be present throughout the day.
Do you supply replacement fire doors as well as install them?: AFP Wales supplies and installs replacement fire doors, helping ensure that all components are suitable, compatible and correctly specified. This reduces the risk of mismatched products or responsibility gaps between suppliers and installers. Our team can assess your requirements, recommend the correct door type and complete the installation professionally.
What happens after a replacement fire door is installed?: After installation, you should retain the relevant documentation for your fire safety records. The replacement door should also be included in your ongoing inspection and maintenance programme, as fire doors can become damaged or misaligned over time through daily use. AFP Wales can support with future inspections, maintenance and remedial works to help ensure your replacement fire doors remain compliant.

Latest news

All news

10 minute read

How To Conduct A Fire Risk Assessment For Your Business

7 minute read

How Addressable Fire Alarms Support Compliance in Housing Associations